| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| eisenglass replacement for a four winns 268 2000 https://www.smwebhead.com/phpBB3/viewtopic.php?f=22&t=14835 |
Page 1 of 1 |
| Author: | GTbay [ Tue May 10, 2016 11:36 am ] |
| Post subject: | eisenglass replacement for a four winns 268 2000 |
A while ago there was a post about getting replacement glass, I believe they were located in Tenn. or Kentucky. Cannot find who the company was. Any help? |
|
| Author: | Cap'n Morgan [ Tue May 10, 2016 11:43 am ] |
| Post subject: | Re: eisenglass replacement for a four winns 268 2000 |
Not sure why you want to send it away for replacement when you have many good shops right here in West Michigan. I used these guys for my 268 Isinglass Affordable Custom Canvas LLC Boat Cover Supplier Address: Muskegon, MI 49441 Phone:(231) 755-3100 These guys for canvas and one screen repair on our 282CR Miller's Canvas Shop Boat Cover Supplier Address: 6531 E Meinert Rd, Holton, MI 49425 Phone:(231) 821-0771 Or.... http://www.canvasinnovations.us/welcome 11276 E. Lakewood Blvd., Holland, MI 49424 616-393-4400 http://www.westmichigancanvas.com/marine.php West Michigan Canvas -11041 Paw Paw Drive, Holland, MI 49424 | phone: 616-355-7855 to name just a few... |
|
| Author: | grkrze [ Tue May 10, 2016 4:56 pm ] |
| Post subject: | Re: eisenglass replacement for a four winns 268 2000 |
I had all glass, side, and aft curtains made to spec for my 1999 268 by FW. Cost was approx $1200. I was put in contact with FW dealer (Skipper Buds in Marblehead, OH) and they ordered from factory. Had all shipped to my house. |
|
| Author: | Surface Interval [ Tue May 10, 2016 7:12 pm ] |
| Post subject: | Re: eisenglass replacement for a four winns 268 2000 |
If you have a radar arch you might look at Great Lakes Boat Top (google search). They made original tops for Four Winns boats like the 268, etc. with an arch. If you do not have a radar arch you might check with a Four Winns dealer. I was told by my dealer a year ago that Four Winns made the tops for non-arch boats and can supply replacements. At that time they quoted me a little over $2100 for the 268 camper enclosure (bimini top, front, sides, and back. I believe it included frame and hardware. In either case the tops are made to the original pattern. The installer will most likely need to install the snaps on the lower edges that attach to the boat. As others suggested, you may want to check with a local shop for anything custom. |
|
| Author: | GTbay [ Thu May 12, 2016 9:46 am ] |
| Post subject: | Re: eisenglass replacement for a four winns 268 2000 |
Thanks everyone. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|