| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Where to find 268 Vista bimini tensioner/hold down strap? https://www.smwebhead.com/phpBB3/viewtopic.php?f=22&t=15288 |
Page 1 of 1 |
| Author: | vista_sg [ Sun Jan 01, 2017 11:40 pm ] |
| Post subject: | Where to find 268 Vista bimini tensioner/hold down strap? |
Hi all, Seems like both my tensioner/hold down straps (hold the front of the bimini to the eye bracket on the windshield) have deteriorated. I'm not sure they are original parts as they seem to have been connected to the bimini metal support with a single screw, then a clip to the eye bracket. Is this correct? Any idea where I can get new ones from? I searched on the FW customer service site but doesn't seem to list the product in the brochure, searching online doesn't seem to return the right results either. Doesn't have to be OEM, but some recommendations of the best place to buy online and an example of how these SHOULD be fitted to a 2000 268 Vista would be greatly appreciated! Cheers |
|
| Author: | chris268 [ Mon Jan 02, 2017 1:21 am ] |
| Post subject: | Re: Where to find 268 Vista bimini tensioner/hold down strap |
If you have a radar arch, Great Lakes supplied the Bimini tops and other camper enclosure pieces for the factory.... I would look at overtones for an after market setup like this http://www.overtons.com/modperl/product ... ir&i=74989 Good luck Chris |
|
| Author: | Surface Interval [ Mon Jan 02, 2017 9:02 am ] |
| Post subject: | Re: Where to find 268 Vista bimini tensioner/hold down strap |
The strap configuration you describe sounds like the OEM parts. Great Lakes Boat Tops supplied the canvas and enclosure systems for the 268s with a radar arch. Four Winns made the systems for the 268s without an arch. You could contact Four Winns or Great Lakes Boat Top for the straps and other replacement parts you may need, or you could buy a generic strap from an after-market supplier like Overtons. The strap that Chris linked would probably work, but the hook end looks lighter duty than OEM, and could bend. |
|
| Author: | EvilZ [ Mon Jan 02, 2017 9:52 am ] |
| Post subject: | Re: Where to find 268 Vista bimini tensioner/hold down strap |
Surface Interval wrote: The strap that Chris linked would probably work, but the hook end looks lighter duty than OEM, and could bend. I bought those straps and they did bend in a particularly strong wind. I'm on the hunt for the heavier duty hooks.... Something like these, perhaps: http://www.iboats.com/Bts-48-Bimini-Hold-Down-Strap-Kit/dm/view_id.268466 |
|
| Author: | vista_sg [ Mon Jan 02, 2017 7:52 pm ] |
| Post subject: | Re: Where to find 268 Vista bimini tensioner/hold down strap |
Thanks guys, I read some reviews of the Overtons products that said they were not too good in strong winds or at planing speeds. The winds here (Singapore) are normally pretty strong and given that we are on the equator it's not really an option to travel with the bimini stowed unless you're a fan of having a red head! I'll take another look at Great Lakes and see if I can find the correct parts. Cheers 
|
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|