| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| isinglass panel cost https://www.smwebhead.com/phpBB3/viewtopic.php?f=22&t=16008 |
Page 2 of 2 |
| Author: | JeffLW [ Tue Sep 04, 2018 7:40 am ] |
| Post subject: | Re: isinglass panel cost |
I test fit the panels on Sunday and they definitely need some help to get rid of the sag in them. I tried adjusting the bimini towards the back using the hold down straps. This helped but wasn't enough to get them completely tight and this caused the rear side panels to not fit right. After looking at it for a while I realized that the front bow of the bimini top is too short. If I pushed it up and toward the front it was perfect. I think the front and possibly the rear bows need to be lengthened an inch or two on each end to make it right. Now to figure out how to do that. I searched for bimini hardware but couldn't find anything that would work. What I need is a union piece and some more tubing to extend the ends of the bows. If I can't find anything I guess I'll have to have some new bows made at a local shop. |
|
| Author: | Warnerzibre [ Sun Dec 30, 2018 8:51 am ] |
| Post subject: | isinglass panel cost |
I dont know about the first two have to look into it, but I think you should only consider the 3D if you would really watch 3D. If you did I dont think it would be good enough on a 27 inch monitor. The question stands between the LED IPS panel HD vs LED HD. |
|
| Page 2 of 2 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|