|
email admin your custom rank |
Joined: Thu May 18, 2006 12:31 pm Posts: 2108 Location: Chester, UK
|
Later ones have push fit couplings (with a blue plastic hose). Earlier ones might not be exactly the same, but the system is probably similar:
Hose from freshwater tank to pump. Inlet screen on pump inlet; can get blocked with stuff if unused for a while Pump detects pressure and only runs to maintain the pressure so runs when the tap (= faucet) is opened Plastic plug with 2 pins supplying power; check for corrosion/ loose/ power ( one terminal +ve, the other is to ground) Hose to tap Switch for power somewhere at the helm or possibly near the sink. Fuse for pump at fusebox or inline
Graham
|
|