| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Sealing the grille for the horn - 1997 https://www.smwebhead.com/phpBB3/viewtopic.php?f=22&t=3838 |
Page 1 of 1 |
| Author: | 97_245_sd [ Sun Jun 21, 2009 11:02 pm ] |
| Post subject: | Sealing the grille for the horn - 1997 |
I seem to be getting water into the boat from grille for the horn. This horn is mounted on the starboard side under the helm.  Is there supposed to be something behind the grille to seal it? I don't mean a gasket around it but some sort of plastic membrane to let sound through but keep water out? |
|
| Author: | 07H200SS [ Mon Jun 22, 2009 9:04 am ] |
| Post subject: | Re: Sealing the grille for the horn - 1997 |
I know my horn has a plastic film behind grille covering the horn. Not sure if all boats are the same though. Mine is up on the front of the bow. |
|
| Author: | Jim_R [ Wed Jun 24, 2009 10:33 am ] |
| Post subject: | Re: Sealing the grille for the horn - 1997 |
I noticed that white plastic looking membrane covering the stock drop in Fiam horn when I replaced it with a dual horn Fiam unit. The dual horn did not have the membrane. I haven't noticed a problem with water coming in yet, but there's no reason I shouldn't. Been thinking of calling over to Fiam to ask about the membrane. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|