www.iFourWinns.com

i just bought a used 1992 four winns 220 horizon.. boat is in awesome condition.. i did notice that the steering wheel is broken almost in half.. the guy who owned it must have pulled on it pretty hard over a wake or something.. the one side is held by the covering.. i would like to replace it with the same color and kind if i can.. the center cap is good still.. its a light gray ish color.. if anyone knows where i can find an exact replacement i would be very thankful!!

David

_________________
1992 Four Winns 220 horizon

OEM here: http://www.fourwinns.net/partbook/

Take the part # to dealer... However I would just buy something else off ebay if I were you.

_________________
99 Horizon 190 - Volvo 5.7
06 Sea Doo RXP (79 GPS) / 05 Sea Doo GTX Limited (74 GPS)

I took off my OE wheel and put on a destroyer style wheel with a spinner knob, which is a lot more functional than the OE one was.

_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8

1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II

i checked out you link jordan.. but it only goes back to 1996.. i have a 1992.. unless you think they used the same part in that year?

_________________
1992 Four Winns 220 horizon

Any wheel with a 3/4 tapered hole (all boat wheels) or you can ebay an adapter and install any standard aftermarket steering wheel. I've been fancying a 60's style wood ford mustang style. Or you could go all out and get a new 2012 Horizon wheel.

_________________
1981 Columbia 8.7
2015 Yamaha FZR - 87mph - sold
2006 Yamaha GP1300R - sold
2003 Chaparral 215 SSI - sold
2009 Stingray 195CS - sold
2000 Four Winns H180 - sold
1976 O'day Daysailer II - sold
Rick's Four Winns H180 Mods/Upgrade Thread

Most newer boats don't use the 3/4" tapered shaft steering wheels but a hub system

Well, whatever your boat has... you can buy adapters.

Like this:
http://shop.vendio.com/crowderscustomiz ... 1313567763

http://cgi.ebay.com/ebaymotors/Boat-3-4 ... 687wt_1165

_________________
1981 Columbia 8.7
2015 Yamaha FZR - 87mph - sold
2006 Yamaha GP1300R - sold
2003 Chaparral 215 SSI - sold
2009 Stingray 195CS - sold
2000 Four Winns H180 - sold
1976 O'day Daysailer II - sold
Rick's Four Winns H180 Mods/Upgrade Thread

The original steering wheel may well be attached to an adaptor already; they were on both my 1999 and 2004 boats. The centre of the 2004 one for sure is splined, not a taper/key. Both wheels were attached to the adapters with 6 countersunk allen bolts, in a standard PCD spacing I imagine. So, an aftermarket wheel could in my case have been fitted to the original adapters.

I did buy an aftermarket "Victor" leather covered wheel for my 2004 boat; it turned out to have a 5 hole setup, not a 6 hole ! it just required some holes redrilling in the wheel, the PCD was the same.

Graham

Hi lads,

I have this wheel on my boat i just bought. The whole center plastic cover is missing. Does anyone know the part numbers?
I believe its a Ultraflex brand. The top one I believe is the one. Mine on the bottom pic.
2006 model..

_________________
2006 Four Winns, Horizon 180. Alpha 1 Gen2 leg with Solas SS 4 Blade Prop
135 HP Mercruiser. Clarion Stereo System. Swim Platform made in Colorado and Imported to Sydney.