www.iFourWinns.com

Hey, I bought a slip/lift at the lake for my boat. It has a pontoon and a bowrider bunk set installed. The previous owner had a pontoon.

The bowrider bunks are adjustable but I'm not sure what width to use for my boat. '05 Horizon 210.

Anyone happen to have a similar model and lift that could tell me the width? Could I base it off the bunk width on my trailer.

Thanks in advance. Probably a long shot but thought this would be a good place to ask.

_________________
2005 Horizon 210, 5.7L Volvo

Should be safe using the dimensions on your trailer as a guide.

_________________

1996 205 Sundowner DLX
5.0FL Volvo SX Cobra
Tow Veh: 2012 Nissan Frontier Pro-4X

If your trailer has 4 bunks, and the lift only has 2, I would think you would use the width of the "inner" bunks. The bow should center-up by itself, but you still might want to add side bunks at the stern.

_________________

"Knot Easy" 2000 Horizon 240 Volvo 5.7GS /SX
tow: 2017 Honda PILOT EXL-AWD
prev. boats:
'87 Chaparral 198CXL 4.3 OMC Cobra
'69 Jetstar 16ft Ski Boat, 115hp Yamaha
'68 Aluminum Jon Boat, 3hp Sears
'64 Water Wings

My stock trailer bunks were 2x4's but I changed them and lengthened them to 2x6's. If I were buying a lift I'd use the same.

_________________


Mike
2005 Four Winns 230/240
VP 5.7GXi/DP
1998 F-150 XLT
Boat Pic

Our lift has 2x10 banks and 26" a part at the top... it is angled at 75dgrees....

_________________

08 H260 VP 8.1Gi DP.....Previous
2013 Crownline E6 Merc 8.2MAG BIIIX, DTS/SC