www.iFourWinns.com

Hi guys, got a '05 210 Horizon on a Four Winns 2005 galvenized bunked trailer. Currently it's up in line to be winterized. I'm looking for what the overall width is of the boat and trailer, if any anyone around can help out on this. I have the opportunity to possibly put it inside someone's garage, if it'll fit thru the doors.

_________________
'05 Four WInns 210 Horizon
'16 Sierra SLT 6.2L

8'6"

Your Beam is listed as 8'6" on the FW website, and your trailer is normally no wider than the widest beam of the boat, even with the normal side bunks and fenders. Especially considering that 8'6" is the widest it can be without requiring a wide-load permit.

_________________

"Knot Easy" 2000 Horizon 240 Volvo 5.7GS /SX
tow: 2017 Honda PILOT EXL-AWD
prev. boats:
'87 Chaparral 198CXL 4.3 OMC Cobra
'69 Jetstar 16ft Ski Boat, 115hp Yamaha
'68 Aluminum Jon Boat, 3hp Sears
'64 Water Wings

I have a 230 Horizon with a 8' 6" beam and I needed 9 foot of clearance. Luckily the barn I was storing it in was 10Ft. wide and it made it a little easier to get in. Also check the height.

I measure mine yesterday. From outside of tire to tire it was 8' 7". If trying to fit it in somewhere, I would round it up to 9 foot, or just grease up the fenders.

_________________

1996 205 Sundowner DLX
5.0FL Volvo SX Cobra
Tow Veh: 2012 Nissan Frontier Pro-4X