www.iFourWinns.com

Hi folks, as a new to me owner of a '05 H210, the wife would like to add the table. My question is, those of you with an original, factory mounted table, where is it located and might you have any pics of it installed? Thanks in advance.

_________________
'05 Four WInns 210 Horizon
'16 Sierra SLT 6.2L

Congrats on your 210. We love ours and I'm sure you will too. The table mounts into the floor in the u-seat. We rotate the cockpit seats around to use at the table too. Here are two pics. One shows the table in use, the other shows the location in the floor of the black mount cap.

_________________
Seth




2005 210 Horizon
5.0L GXi
"Don't Think Twice"

Ok, great, thanks for the pics. Helps a bit. But also in that vicinity, I have an inspection cover for the fuel tank. Is your mount mounted over the same cover plate?

_________________
'05 Four WInns 210 Horizon
'16 Sierra SLT 6.2L

Mine similar location but mounted into the base of the u-seat. The pole that the table sits on has a 45 degree bend in it. Don't have any pics sorry.

_________________
Paul
2007 Four Winns Horizon 220
Mercruiser 350 Mag MPI w/ Bravo III Drive
2004 Ford Explorer Limited (V8-AWD)
Pomme de Terre Lake (Southwest Missouri)

I also have the access cover for the fuel tank, but I think mine is closer to the ski locker. The table mount is between the fuel tank access and the aft seat. Boat is in storage so I don't remember the exact location of the access cover, but I'm pretty sure that is how it is.

_________________
Seth




2005 210 Horizon
5.0L GXi
"Don't Think Twice"

Pet575, I just bought one of the side mount angled pedestal tables, in transit to me. I went with the cheaper anodized aluminum instead of stainless steel. What is yours made of, and how sturdy is it?

_________________
'05 Four WInns 210 Horizon
'16 Sierra SLT 6.2L

Where did you purchase your table?

_________________
Seth




2005 210 Horizon
5.0L GXi
"Don't Think Twice"

http://www.iboats.com/Acrylic-Coated-Ov ... _id.713781
We bought our's 2 years ago.
Beats the hell out of a hole in your floor, the side mount is very sturdy as well.

_________________
One of 4 Previous (Sold) Boats:
2000 Four Winns 268 Vista

Current Boat: 2004 Chaparral 235 ssi cuddy

Mine stainless. Is incredibly sturdy and solid. I would not be afraid to use it for holding probably 15 lbs.

_________________
Paul
2007 Four Winns Horizon 220
Mercruiser 350 Mag MPI w/ Bravo III Drive
2004 Ford Explorer Limited (V8-AWD)
Pomme de Terre Lake (Southwest Missouri)

Thanks for all the help and advice everyone. I did finally pull the trigger and get a side mount, anodized aluminum pedestal table mount, from Wholesalemarine.com. They were the cheapest out there for the product and shipping. Look forward to mounting it and using it, as April is around the corner and by the end of the month, boat will be in the water.

Everyone enjoy and be safe.

_________________
'05 Four WInns 210 Horizon
'16 Sierra SLT 6.2L