www.iFourWinns.com

Squeaky clean valley!








I'll kick it in the guts this morning, set the timing, idle and mixtures.

_________________
2011 Four Winns H180 SS.
Aussie built Mustang 2800.
SOLD - 1997 Four Winns Horizon RS

Looks great. Does the Holley use an electric choke? I see the block off plate for the old style choke stove...

_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8

1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II

No choke on this carb, as everyone I've spoken to advises that it's not required on a squarebore.
Ran it today and the rear fuel bowl leaks where it meets the carb body.
Pulled the carb and it's going back to where I bought it - aargh!

_________________
2011 Four Winns H180 SS.
Aussie built Mustang 2800.
SOLD - 1997 Four Winns Horizon RS

Holley website is great!
Adjusted the float levels and she purrs like a kitten.
Going to fit a PCV system as I now have a PCV port on this carb.
Oil should last a little longer?

_________________
2011 Four Winns H180 SS.
Aussie built Mustang 2800.
SOLD - 1997 Four Winns Horizon RS

So it turns out that this 'spider' retainer is actually for a Roller Camshaft & my engine is sort of a Vortec configuration, but with the older Swirl Port heads.


I'm struggling to find any cam spec's, as all VP manuals for this model are showing a flat tappet cam.
Any Chevy gurus out there that may know whether this is the same cam as the newer Vortec setup?
Same cam as the Gen 1, roller 260hp 350 Chevy?

_________________
2011 Four Winns H180 SS.
Aussie built Mustang 2800.
SOLD - 1997 Four Winns Horizon RS

New Edelbrock engine p0rn.

_________________
2011 Four Winns H180 SS.
Aussie built Mustang 2800.
SOLD - 1997 Four Winns Horizon RS

Messing around with main jets.
Soooo close!



Can't beat a chine walking family bowrider!

_________________
2011 Four Winns H180 SS.
Aussie built Mustang 2800.
SOLD - 1997 Four Winns Horizon RS