www.iFourWinns.com • View topic

View unanswered posts | View active topics

Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]

Power trim

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

MTONeill73

Post subject: Power trim

Posted: Mon Jun 10, 2024 9:48 am

Tadpole

Joined: Mon Jun 10, 2024 9:28 am
Posts: 1

I'm having issues with my power trim, it was stuck in the up position, I was able to jump the switch out to get it lowed but now I can't get it to do anything. I've checked all the fuses and they are good, the relays are clicking when I jump the switch out but the pump doesn't run and the only way I can get power at the switch is to run wire directly to the fuse at the pump. Any ideas??

Top

LouC

Post subject: Re: Power trim

Posted: Mon Jun 10, 2024 11:24 am

email admin your custom rank

Joined: Thu Jun 29, 2006 10:26 pm
Posts: 5682
Location: Long Island NY

If you have both power to the up & down relays and good grounds it could be the trim switch on the remote control or a wire could have broken inside the remote control. The relays get power & ground from the engine harness but the remote control turns each relay on.

_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8

1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II

Top

Page 1 of 1

[ 2 posts ]

Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum