'93 190 Horizon. 20 year revival (Pic heavy)

Jdpber · **Posted:** Tue Jul 05, 2016 10:54 am

oh also. easy kid shade and nap time shade was a $5 8x15 tarp and 8 spring clamps from the shop. super easy and effective

LouC · **Posted:** Tue Jul 05, 2016 12:15 pm

Great that you got it out there. Love the pix of the future captain.

rpengr · **Posted:** Tue Jul 05, 2016 12:34 pm

Congrats that your back out on the water.

deafwish · **Posted:** Tue Jul 05, 2016 4:01 pm

Nice one, John!

Jsyphil · **Posted:** Wed Jul 06, 2016 7:44 am

Brilliant stuff, top work.
So good to see it floating after all the work,

rpengr · **Posted:** Wed Jul 06, 2016 8:14 am

Jdpber wrote:

I've never seen an engine like yours. Reminds me of the Borg Ship on Star Trek:

Ray

Jdpber · **Posted:** Wed Jul 06, 2016 10:43 am

ha ha ha it is all out in the wide open. Has a battery tray setting on the top and the top plastic plate is off at the moment.

Jdpber · **Posted:** Mon Jul 11, 2016 9:41 am

found a little leak in my inner seal of one of the wheel hubs. So new Bearing Buddys and complete bearing kits were ordered and will go in tomorrow night.

zims1993 · **Posted:** Mon Jul 11, 2016 9:46 am

Interesting on your trailer that you have hubs, mine are integral hub/drum...

Jdpber · **Posted:** Mon Jul 11, 2016 10:53 am

zims1993 wrote:

Interesting on your trailer that you have hubs, mine are integral hub/drum...

post a picture of yours.

zims1993 · **Posted:** Sat Jul 16, 2016 8:45 am

https://drive.google.com/open?id=0Bx3bjtiUKr0COTF3SnhaLWluMmM

Jdpber · **Posted:** Sat Jul 16, 2016 1:04 pm

Use 67 then 45 then the flagship premium. And you will get this finish. I use a DA variable professional 6" polisher. 3 step pads. Seperate terry rags for blue and white gel for each material step. Aka 6 different rags.

Jdpber · **Posted:** Sat Jul 16, 2016 1:07 pm

GottWhat · **Posted:** Sun Jul 17, 2016 9:33 am

How long do you think it would take to install bearing buddys?

Good work on the wax/polish, nice and shiny!

Jdpber · **Posted:** Sun Jul 17, 2016 7:55 pm

GottWhat wrote:

How long do you think it would take to install bearing buddys?

Good work on the wax/polish, nice and shiny!

Without rebuilding the hubs... About 10 minutes. You simply use the rubber hammer to knock the old caps off. Then you bang the new ones on.

Rebuilding the hubs..... Took me about 45 minutes start to finish, and that was pulling out the jack and tools, rebuild, cleanup. It is a very simple and straight forward task. ****NOTE that you may need to sand the rim of the earring buddy to get it to mate with the hub. One of mine was a thousandth too large so I hit it with 1,200 grit on the big belt sander to take a little f the machining off and she hammered into the hub nice and snug.

www.iFourWinns.com

'93 190 Horizon. 20 year revival (Pic heavy)

Who is online