www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

temp gauge replacement
https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=10179		 Page 1 of 1
Author:  pooz [ Fri Aug 24, 2012 10:35 am ]
Post subject:  temp gauge replacement
Hi - new to the forum. Have a 1998 Horizon QX - 4.3 Volvo. Temp gauge not working. where can I order a replacement gauge?
Any help greatly appreciated.
Author:  ric [ Fri Aug 24, 2012 10:43 am ]
Post subject:  Re: temp gauge replacement
pooz wrote:
Hi - new to the forum. Have a 1998 Horizon QX - 4.3 Volvo. Temp gauge not working. where can I order a replacement gauge?
Any help greatly appreciated.


If it's the separate gauges like my 2000 H180 was, it used VDO Vision gauges.

http://www.jegs.com/i/VDO/918/310-105/1 ... tId=760373

And they're complete trash. Click on my H180 mod's link in my signature. I swapped em out for Farias

Quick link:
viewtopic.php?f=3&t=8691&st=0&sk=t&sd=a&start=105
Author:  Paul I. [ Fri Aug 24, 2012 11:40 am ]
Post subject:  Re: temp gauge replacement
pooz wrote:
Hi - new to the forum. Have a 1998 Horizon QX - 4.3 Volvo. Temp gauge not working. where can I order a replacement gauge?
Any help greatly appreciated.


You may want to check the ground to the gauge first.
Author:  pooz [ Sat Sep 01, 2012 3:54 pm ]
Post subject:  Re: temp gauge replacement
so, not having much boating luck this summer. Blew exhaust hose, back to the shop. replaced both exhaust hoses and new thermostat. Another $350. But boat is back in water now. Decided I need to be able to watch water temp to be sure I'm not over heating. replaced gauge - still no reading on water temp. Can you explain how to "check the ground"? Also, I'm guessing I should replace "sending" unit. Parts are not expensive, is it any easy fix for someone who knows how to use a socket and screwdriver? Where on the motor IS the sending unit? Is it easy to get to? Any info appreciated. Thanks.
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/