www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

water proofing covers
https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=10364		 Page 1 of 1
Author:  jontmiller [ Wed Sep 19, 2012 7:33 pm ]
Post subject:  water proofing covers
double posting for more traffic...can delete if it causes too much heartburn.

I treated my bow and cockpit covers last week according to the instructions othe bottle, wandered over othe deluge today and was hoping it would be beading off like a newly waxed car :).... And while some of it was other parts were not. For the record it looked about the same as all the other boats there too.

Did I do it wrong, is that normal, or something else....not a huge deal just curious

Image
photo 2.JPG by millerjont, on Flickr

Image
photo 1.JPG by millerjont, on Flickr
Author:  vipergg [ Wed Sep 19, 2012 8:40 pm ]
Post subject:  Re: water proofing covers
Looks ok to me, you will always get little pools in places where the fabric is not really tight. Looks just like my 4 winns cover.
Author:  Jafo4U [ Thu Sep 20, 2012 2:42 am ]
Post subject:  Re: water proofing covers
vipergg wrote:
Looks ok to me, you will always get little pools in places where the fabric is not really tight. Looks just like my 4 winns cover.


+1 My cover looks exactly the same, I get the same pooling on the port side also, I started placing the bow cushions on the sides and it has helped stop that from happening
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/