| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 180 Freedom 4.3 King Cobra outsdrive https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=11411 |
Page 1 of 1 |
| Author: | Jason Jordan [ Wed May 08, 2013 12:36 pm ] |
| Post subject: | 180 Freedom 4.3 King Cobra outsdrive |
Bought boat but previosly owner changed things. I am trying to find the proper prop for boat. I have a 14X20 4 blade prop and the motor turns 5100 RPM's (to High) Any help is appreciated. 4.3 v6 king Cobra drive. I also can't get the dipstick to stop leaking at the oil pan fitting any help is appreciated. |
|
| Author: | NiagaraChillin [ Wed May 08, 2013 1:48 pm ] |
| Post subject: | Re: 180 Freedom 4.3 King Cobra outsdrive |
Hmmm, is the dipstick tube the type that runs thru the drain plug into the oilpan? If so, you can do 2 things. Cheapy way is to coat it in forma gasket. More labor (and $$$) intensive way is to remove the whole assembly and have the flange on the inside of the drain plug re-done. Dumb question, but, have you checked to see if the drain plug was tight? Can't really help on the prop question, I like the one I have so I don't really know much about 3 vs 4 blade, or different pitch and whatnot. |
|
| Author: | PDACPA [ Thu May 30, 2013 9:56 am ] |
| Post subject: | Re: 180 Freedom 4.3 King Cobra outsdrive |
I have a 180 Freedom (same as horizon basically) with the 4.3 Volvo V6. My prop is a 14 1/4 x 23 (OEM Volvo stainless). |
|
| Author: | The Kid [ Thu Jun 06, 2013 3:34 pm ] |
| Post subject: | Re: 180 Freedom 4.3 King Cobra outsdrive |
What Year is the 180?? And you definitely don't have a King Cobra... you may have a Cobra drive but def. not a King Cobra.. those drives were exclusively for v8's with big horse power |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|