Our lift has 2x10 banks and 26" a part at the top... it is angled at 75dgrees....
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Bunk Width on a boat lift? https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=11500 |
Page 1 of 1 |
| Author: | mikebaker1975 [ Thu May 16, 2013 9:56 am ] |
| Post subject: | Bunk Width on a boat lift? |
Hey, I bought a slip/lift at the lake for my boat. It has a pontoon and a bowrider bunk set installed. The previous owner had a pontoon. The bowrider bunks are adjustable but I'm not sure what width to use for my boat. '05 Horizon 210. Anyone happen to have a similar model and lift that could tell me the width? Could I base it off the bunk width on my trailer. Thanks in advance. Probably a long shot but thought this would be a good place to ask. |
|
| Author: | NiagaraChillin [ Thu May 16, 2013 11:52 am ] |
| Post subject: | Re: Bunk Width on a boat lift? |
Should be safe using the dimensions on your trailer as a guide. |
|
| Author: | rpengr [ Thu May 16, 2013 12:37 pm ] |
| Post subject: | Re: Bunk Width on a boat lift? |
NiagaraChillin wrote: Should be safe using the dimensions on your trailer as a guide. If your trailer has 4 bunks, and the lift only has 2, I would think you would use the width of the "inner" bunks. The bow should center-up by itself, but you still might want to add side bunks at the stern. |
|
| Author: | 230 Mike [ Thu May 16, 2013 3:28 pm ] |
| Post subject: | Re: Bunk Width on a boat lift? |
My stock trailer bunks were 2x4's but I changed them and lengthened them to 2x6's. If I were buying a lift I'd use the same. |
|
| Author: | Flying Sushi [ Fri May 17, 2013 8:35 pm ] |
| Post subject: | Re: Bunk Width on a boat lift? |
Our lift has 2x10 banks and 26" a part at the top... it is angled at 75dgrees....
|
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|