| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Seat Question https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=11522 |
Page 1 of 1 |
| Author: | Shanhuber [ Sat May 18, 2013 8:37 pm ] |
| Post subject: | Seat Question |
I have a 2008 Four Winns H200 and want to modify the helm seats to have adjustable height. Does any one know who makes the seats for Four Winns H200 or know where I can get adjustable low profile pedestals? Right now it measures 5" from the floor to the seat mounting plate. I am willing to go up a few inches for the low height, but not too much, as I am 6'5" I would like one that can mount in the existing plate if possible, or at least matches up with the holes for the existing plate. Any help would be great. |
|
| Author: | PDACPA [ Thu May 30, 2013 9:50 am ] |
| Post subject: | Re: Seat Question |
I bought a seat post at west marine. Previous owner had cut the post and it sat too low. Seat fit perfectly on it and now it swivels and has adjustments. The mounting screws matched up perfectly too. |
|
| Author: | ric [ Thu May 30, 2013 9:51 am ] |
| Post subject: | Re: Seat Question |
Attwood makes nice ones. That's my next project. Someone cut my seat post too. I'm 6'1 and can barely see over even.with the bolster up. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|