www.iFourWinns.com • View topic

View unanswered posts | View active topics

Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]

Lounger Seat

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

4WINNS4ME

Post subject: Lounger Seat

Posted: Sun Aug 05, 2007 1:00 pm

email admin your custom rank

Joined: Wed Jan 31, 2007 6:39 pm
Posts: 166
Location: Whitinsville, Ma

Hey guys. been a long time since i've posted. i was wondering if anyone has had any problems with their port side lounger seat? I have 2 screws that keep popping out of the frame and the bottom of the seat. This only happens on the rear seat. Anyone else run into this problem? Its almost like the screws are too short. So far though i'm very happy with the boat other than a few minor things.

Top

Jim_R

Post subject:

Posted: Tue Aug 07, 2007 8:03 am

Narwhal

Joined: Mon Feb 26, 2007 10:29 am
Posts: 1035
Location: Chicago, IL

Although I suspect I have a different model than you, I have had a few screws come loose to the point where they fall out. Adding a dab of 'blue' thread locker to the threads prior to re-installation has been the fix so far.

_________________
2007 Horizon 200
4.3L GXi/ SX 225 HP

Top

4WINNS4ME

Post subject:

Posted: Tue Aug 07, 2007 6:59 pm

email admin your custom rank

Joined: Wed Jan 31, 2007 6:39 pm
Posts: 166
Location: Whitinsville, Ma

yeah thats basically what i did put instead used a 2 part epoxy. it seems to be holding for now in the driveway we'll see how it does on the water though. thanks for the reply

Top

Page 1 of 1

[ 3 posts ]

Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 92 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum