www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

K&N flame arrester 1996 5.8FL
https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=11974		 Page 1 of 1
Author:  fiznuka [ Sun Jul 14, 2013 8:57 pm ]
Post subject:  K&N flame arrester 1996 5.8FL
Here are some pictures of a new flame arrester I installed on my engine. 8)

What came in the box. Part #59-3364

Image

What didn't come in the box was a new air cleaner stud. Don't know if the stock replacements use the existing stud or not.

Image

Image

Image

Before. :roll: I built a new 351w so never mind the 5.0 cover

Image

After :twisted:

Image

Went with the 9" wide just to make sure it fit with no clearance problem with the ignition coil. The height was almost an issue but fit. Part # 59-3364

Image



Image
Author:  deafwish [ Sun Jul 14, 2013 10:18 pm ]
Post subject:  Re: K&N flame arrester 1996 5.8FL
Yeah! :) 8)
Author:  Jafo4U [ Thu Jul 18, 2013 1:24 am ]
Post subject:  Re: K&N flame arrester 1996 5.8FL
That looks crazy cool! Nice job.
Author:  deafwish [ Fri Sep 25, 2015 12:48 am ]
Post subject:  Re: K&N flame arrester 1996 5.8FL
Hay fiznuka,

What seating arrangement does your boat have?
Any other pictures you could please share?
I'm looking at buying the same arrestor and have concerns about clearance...
I have the 'dog house' seating arrangement on mine...

Cheers.
Author:  fiznuka [ Sat Sep 26, 2015 2:31 pm ]
Post subject:  Re: K&N flame arrester 1996 5.8FL
I don't know the name of the seating but I have the doghouse over the engine and a seat on each side. I can take more pictures of whatever you need the boats in the driveway so I have easy access to it.
Author:  deafwish [ Sun Sep 27, 2015 4:01 pm ]
Post subject:  Re: K&N flame arrester 1996 5.8FL
Cheers for the response.
We have the same seating but different engines, so clearance might be different...
Any pics from further away would be perfect, please?! :wink:
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/