www.iFourWinns.com • View topic - nut size for popup cleat on '06 Horizon 200

View unanswered posts | View active topics

Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]

nut size for popup cleat on '06 Horizon 200

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

granitehead

Post subject: nut size for popup cleat on '06 Horizon 200

Posted: Sat Aug 31, 2013 3:15 pm

Tadpole

Joined: Sat Aug 31, 2013 3:07 pm
Posts: 2

Hi folks,
Wave action is loosening the starboard rear popup cleat on my '06 Horizon 200. I can't reach the nuts (which haven't fallen off yet) to measure, but with the correct deep well socket and a ratchet extension, I should be able to tighten thru the battery access hole. Can't find them on 4Winns' web site... does anyone know the exact size of these big nuts?
Thanks!

Top

tennja

Post subject: Re: nut size for popup cleat on '06 Horizon 200

Posted: Tue Sep 03, 2013 2:00 pm

email admin your custom rank

Joined: Wed Feb 11, 2009 2:30 pm
Posts: 294
Location: SW Ohio

Doubt that info would be on the 4 Winns site. The cleats would be from an "aftermarket" supplier. Look online at various marine suppliers like defender or a manufacturer site like Attwood and see if you can match.

If it were me I would just use trial and error. If you can get to the nut anyway.

_________________
2008 Horizon 260 VP 8.1 Gi

Top

Page 1 of 1

[ 2 posts ]

Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 25 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum