| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| nut size for popup cleat on '06 Horizon 200 https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=12260 |
Page 1 of 1 |
| Author: | granitehead [ Sat Aug 31, 2013 3:15 pm ] |
| Post subject: | nut size for popup cleat on '06 Horizon 200 |
Hi folks, Wave action is loosening the starboard rear popup cleat on my '06 Horizon 200. I can't reach the nuts (which haven't fallen off yet) to measure, but with the correct deep well socket and a ratchet extension, I should be able to tighten thru the battery access hole. Can't find them on 4Winns' web site... does anyone know the exact size of these big nuts? Thanks! |
|
| Author: | tennja [ Tue Sep 03, 2013 2:00 pm ] |
| Post subject: | Re: nut size for popup cleat on '06 Horizon 200 |
Doubt that info would be on the 4 Winns site. The cleats would be from an "aftermarket" supplier. Look online at various marine suppliers like defender or a manufacturer site like Attwood and see if you can match. If it were me I would just use trial and error. If you can get to the nut anyway. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|