This cant be the only "diagram"
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| NEED 1998 H180 Gauge Wiring diagram. https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=12915 |
Page 1 of 1 |
| Author: | Mitsuboost30 [ Wed May 21, 2014 3:24 pm ] |
| Post subject: | NEED 1998 H180 Gauge Wiring diagram. |
Hello all, Well I'm finally addressing my tach not working issue. I do not have the single piece VDO gauges, I have the individual gauges. Upon digging I have realized there are a few more issues behind the gauges. I really need a wiring diagram. Does anyone have this or know where I can get one?? Thanks |
|
| Author: | LouC [ Wed May 21, 2014 3:56 pm ] |
| Post subject: | Re: NEED 1998 H180 Gauge Wiring diagram. |
Go on the four Winns website and look in customer service... |
|
| Author: | Mitsuboost30 [ Wed May 21, 2014 4:17 pm ] |
| Post subject: | Re: NEED 1998 H180 Gauge Wiring diagram. |
This cant be the only "diagram"
|
|
| Author: | Graham R [ Wed May 21, 2014 4:51 pm ] |
| Post subject: | Re: NEED 1998 H180 Gauge Wiring diagram. |
Mitsuboost30 wrote: This cant be the only "diagram" I think you need to look up "wiring schematics", Up to 2006 they were good, after that , well, not ! |
|
| Author: | LouC [ Wed May 21, 2014 5:39 pm ] |
| Post subject: | Re: NEED 1998 H180 Gauge Wiring diagram. |
The one I have for my '88 is actually pretty good and the wires under the helm are mostly labeled... |
|
| Author: | Mitsuboost30 [ Wed May 21, 2014 11:42 pm ] |
| Post subject: | Re: NEED 1998 H180 Gauge Wiring diagram. |
Thank you gents I will look into it tommorow and report back. |
|
| Author: | meinmelb [ Thu May 22, 2014 8:44 am ] |
| Post subject: | Re: NEED 1998 H180 Gauge Wiring diagram. |
You can find the manuals here. In my 2004 manual the wiring schematic is at the back of the manual. http://www.fourwinns.com/customer-servi ... nuals.aspx |
|
| Author: | Mitsuboost30 [ Thu May 22, 2014 3:33 pm ] |
| Post subject: | Re: NEED 1998 H180 Gauge Wiring diagram. |
yes I have found the wiring schamatic in the back of the manual I have had for almost a year now  Thanks for the help everyone! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|