| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Grinding noise when shifting (2004 H190) https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=12934 |
Page 1 of 1 |
| Author: | 190 Lee [ Sun May 25, 2014 12:28 pm ] |
| Post subject: | Grinding noise when shifting (2004 H190) |
I have a 2004 190 Horizon. I hear a grinding noise when going out of neutral. It happens more prevalent when the engine is not warmed up. Is this typical? I have a Mercruiser 5.0. |
|
| Author: | LouC [ Sun May 25, 2014 1:04 pm ] |
| Post subject: | Re: Grinding noise when shifting (2004 H190) |
Dog clutch shifted outdrives will grind when shifting into gear if: You shift too slowly, they need to be shifted briskly The shift cable is getting sticky and not engaging all the way The shift cable is out of adjustment so you are not getting full engagement in the gear that grinds Sometimes this will happen if the idle speed is way to high You want this fixed, grinding will wear out the sliding dog clutch and the fwd and rev gears and then it won't stay in gear. If those parts wear out you'd be looking at a lower unit rebuild $$$ |
|
| Author: | 190 Lee [ Sun May 25, 2014 1:45 pm ] |
| Post subject: | Re: Grinding noise when shifting (2004 H190) |
Thank you very much. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|