Interesting idea. Not sure it would work where those mounts are. Here's a pic:
I'm leaning towards getting some stainless sheet stock and cutting it to the same size and screwing it into place.
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| What to do with holes after removing wakeboard tower https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=13174 |
Page 1 of 1 |
| Author: | RichA [ Mon Jul 14, 2014 1:55 pm ] |
| Post subject: | What to do with holes after removing wakeboard tower |
I have removed a JoyStick Pro wakeboard tower from my H230 in favor of a standard Bimini (and to respect some trees and wires I have to pass under sometimes when towing). There are 4 attachment blocks, about 2" by 4", left on the boat (no so pretty). I suppose I'll need to take those off if I sell the tower, but that will leave even uglier holes. I suppose the "right" thing is to patch with fiberglass and redo the gelcoat in those spots, but that sounds expensive. Are there cover plates or something similar that could work until I'm ready to redo the rest of the hull? -- Rich |
|
| Author: | NiagaraChillin [ Mon Jul 14, 2014 4:51 pm ] |
| Post subject: | Re: What to do with holes after removing wakeboard tower |
Something like this? http://www.wholesalemarine.com/perko-soft-black-plastic-step-pad-with-chrome-frame-pair.html |
|
| Author: | RichA [ Mon Jul 14, 2014 11:30 pm ] |
| Post subject: | Re: What to do with holes after removing wakeboard tower |
Interesting idea. Not sure it would work where those mounts are. Here's a pic: I'm leaning towards getting some stainless sheet stock and cutting it to the same size and screwing it into place. |
|
| Author: | gale [ Tue Jul 15, 2014 9:15 am ] |
| Post subject: | Re: What to do with holes after removing wakeboard tower |
You could get some stainless carriage bolts with a head diameter slightly larger than the hole. You could polish the heads of the bolts or paint them with epoxy paint to match the gel coat. |
|
| Author: | ric [ Tue Jul 15, 2014 9:17 am ] |
| Post subject: | Re: What to do with holes after removing wakeboard tower |
I would just have it fixed with fiberglass and gelcoat. Cosmetically it would look so much better to be back to normal |
|
| Author: | Kelleyo [ Tue Jul 15, 2014 8:18 pm ] |
| Post subject: | Re: What to do with holes after removing wakeboard tower |
Your boat looks so much better without the tower. 
|
|
| Author: | RichA [ Wed Jul 16, 2014 2:23 pm ] |
| Post subject: | Re: What to do with holes after removing wakeboard tower |
Kelleyo wrote: Your boat looks so much better without the tower. Thanks. I agree. And it will work better for us, too. One day I'd like to get the gelcoat cleaned up and redone, and that would be the time to fully patch the tower holes, but that isn't really in the budget right now. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|