| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Speedo inop https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=13204 |
Page 1 of 1 |
| Author: | ldb3130 [ Thu Jul 17, 2014 6:30 pm ] |
| Post subject: | Speedo inop |
Hello everyone, last trip to the lake the speedometer was a no show. This is my first season with this boat so I contacted the previous owner and he confimed that the speedo had been repaired by a shop a couple of times and had always been sketchy at best in its prime. Its a paddle wheel set up and curious if anyone has successfully fixed their paddel wheel speedo or replaced with with something better? The boat is a 1998 180 Horizon and I welcome your imput. 
|
|
| Author: | newbiechris [ Thu Jul 17, 2014 8:09 pm ] |
| Post subject: | Re: Speedo inop |
Do you have the vdo dash cluster |
|
| Author: | ldb3130 [ Thu Jul 17, 2014 8:15 pm ] |
| Post subject: | Re: Speedo inop |
No I have the Faria speedo gauge, My VDO cluster was not the best. |
|
| Author: | schoolsOut [ Thu Jul 17, 2014 9:09 pm ] |
| Post subject: | Re: Speedo inop |
I know this does not fix your speedo, but I use my smartphone with a speedo app and a phone mount above my dash more than I use my actual speedo. It is much more accurate and responsive for water sports. You could use this while you work to get your speedo fixed. 
|
|
| Author: | ldb3130 [ Fri Jul 18, 2014 9:13 am ] |
| Post subject: | Re: Speedo inop |
Thanks for the info, I will use the GPS as a back up, but i just cant stand looking down and seeing something not working. Having both is the best way to go for sure. |
|
| Author: | ldb3130 [ Fri Jul 18, 2014 11:59 am ] |
| Post subject: | Re: Speedo inop |
Just got word from the local Four Winns dealer that they dont offer the part anymore or know of a replacement 
|
|
| Author: | Taxus812 [ Mon Jul 21, 2014 8:41 am ] |
| Post subject: | Re: Speedo inop |
if it is the gauge, go directly to Faria. If they cant give you a replacement they have a repair service. |
|
| Author: | NiagaraChillin [ Mon Jul 21, 2014 10:08 am ] |
| Post subject: | Re: Speedo inop |
Not familiar with the paddle wheel setup, I have the tube type, but a sailboat I crew on has the paddle wheel, and sometimes we have to go in reverse for a bit to clean the seaweed and gunk off it. Maybe try that? |
|
| Author: | ldb3130 [ Mon Jul 21, 2014 7:45 pm ] |
| Post subject: | Re: Speedo inop |
Sad to say but the wheel is free of debris and spins easily. I think I need a new sensor and pick up, I just need to find one that will work. Has anyone replaced their sensor before with a new one? |
|
| Author: | GottWhat [ Tue Jul 22, 2014 8:31 am ] |
| Post subject: | Re: Speedo inop |
This might help you find another wheel: SeriousRob wrote: I have a 2001 H180 with probably the same paddlewheel speedo. Mine also incorporates the temperature transducer in the paddlewheel enclosure. The part is a Raymarine e66019. Do a google search for that and a bunch will come up for ordering. Once installed it will have to be calibrated to be acurate. I'm not sure ow that is done but a boat shop should be able to figure it out. Good luck Rob From this thread: viewtopic.php?f=3&t=6174 |
|
| Author: | ldb3130 [ Tue Jul 22, 2014 12:29 pm ] |
| Post subject: | Re: Speedo inop |
Thanks for all the info, it was a very helpful. I contacted Faria to see if they had a solution and they sent me the part# to their speed sensor. Here is the part# Faria Paddle Wheel Speed Transducer Item #: FAR SN0007 I will go with this sensor since I have a Faria speedo gauge as well, should go well with one another. Thanks again for all the help!! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|