www.iFourWinns.com

for the life of me I've tried over and over to find a zert on my outdrive to grease the gimble and cannot find one. is it closed off and not have the option the grease?

_________________
2006 Nissan Titan SE 6" Lift
2000 Four Winns 190 Horizon 5.0GL

Post up a pic of the right hand side of your transom mount. That's it is supposed to be...

_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8

1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II

On the right side of your transom mount, about 1" aft of the transom, and about 1/2 way up/down should be a zerk fitting. If you have a recess there with no zerk fitting, then it must have broke off or fallen out.

_________________

"Knot Easy" 2000 Horizon 240 Volvo 5.7GS /SX
tow: 2017 Honda PILOT EXL-AWD
prev. boats:
'87 Chaparral 198CXL 4.3 OMC Cobra
'69 Jetstar 16ft Ski Boat, 115hp Yamaha
'68 Aluminum Jon Boat, 3hp Sears
'64 Water Wings

Or been plugged because thegimbal bearing has been changed to a non greasable "sealed for life" type.

Thanks Guys, I'll take a look at it tonight and see what i have. I think i recall seeing that spot with a cap over it. guessing if that is the case it's "sealed for life". I'm a fairly decent shade tree mechanic so figured I could find it and it wouldn't be this tuff!

Thanks again!

_________________
2006 Nissan Titan SE 6" Lift
2000 Four Winns 190 Horizon 5.0GL