| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Winterizing a 5.0 GXi Motor https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=13480 |
Page 1 of 1 |
| Author: | danrob [ Sun Sep 14, 2014 6:16 pm ] |
| Post subject: | Winterizing a 5.0 GXi Motor |
Folks, I bought a '08 H200 with a V-P 5.0 GXi engine. My previous Four Winns had a 4.3l with a carburetor so I was able to fog the engine before putting it away. I checked the manual and I cannot find any information on how to properly winterize the fuel system. I have filled up the tank with Premium fuel and added a stabilizer but wondering if there is something i should be doing for the injectors. Appreciate any tips or suggestions. Dan |
|
| Author: | Wrench [ Sun Sep 14, 2014 8:12 pm ] |
| Post subject: | Re: Winterizing a 5.0 GXi Motor |
My thoughts are the injectors are high pressure devices (as compared to a carb) and protected by the fuel filter ahead of them inline. I would remove spark plugs and fog into each cylinder to promote piston ring and valve lube. |
|
| Author: | noexcuses [ Mon Sep 15, 2014 8:09 am ] |
| Post subject: | Re: Winterizing a 5.0 GXi Motor |
Volvo Service Bulletin for fogging MPI engines: http://www.seafarermarinesupply.com/use ... torage.pdf |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|