| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Trailer specs for H180 https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=13589 |
Page 1 of 1 |
| Author: | GalacticWaterman [ Sun Oct 26, 2014 3:45 pm ] |
| Post subject: | Trailer specs for H180 |
Hi, Can anyone tell me the width of the H180 (mine is 2006) at the level of the trailer fenders? Also how far are the bunks apart? I'm about to buy a trailer and would like to make sure my boat will fit. Thanks |
|
| Author: | GalacticWaterman [ Wed Oct 29, 2014 1:10 pm ] |
| Post subject: | Re: Trailer specs for H180 |
I suppose the important measurement is the width between fenders of the trailer. Would someone with H180 or the original FourWinns trailer be able to measure that and let me know? Thanks |
|
| Author: | Juniore68 [ Wed Oct 29, 2014 1:20 pm ] |
| Post subject: | Re: Trailer specs for H180 |
If you go to the following link you will find the info you need. Four Winns usually has a fast facts about a lot of their boat. http://www.fourwinns.com/upload/Documen ... s_2006.pdf |
|
| Author: | Juniore68 [ Wed Oct 29, 2014 1:28 pm ] |
| Post subject: | Re: Trailer specs for H180 |
I meant to mention that the spec's are also there for the H180 trailer, as well as the boat spec's. |
|
| Author: | GalacticWaterman [ Thu Oct 30, 2014 9:10 pm ] |
| Post subject: | Re: Trailer specs for H180 |
Juniore68 wrote: I meant to mention that the spec's are also there for the H180 trailer, as well as the boat spec's. Thanks for the link. I do have that pdf file but unfortunately it does not list the width between the fenders. I may have to call FourWinns and see whether someone there can find the info. |
|
| Author: | Juniore68 [ Fri Oct 31, 2014 8:55 am ] |
| Post subject: | Re: Trailer specs for H180 |
If you allow about 5" to 6" on either side on top of the Four Winns beam width spec for your boat, you should be fine. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|