www.iFourWinns.com

Anyone have any knowledge of where to get a replacement snap in carpet kit for a 2000 190 Horizon?

google has pulled up nothing for me so far.

Thanks in advance.

JC

_________________
2006 Nissan Titan SE 6" Lift
2000 Four Winns 190 Horizon 5.0GL

My best suggestion is to buy some marine grade carpet,and use the original carpet as a template to cut to shape. The press studs can be bought and fitted using the original as a template as well. I did this a few years back because the original carpet was rubber backed , and once wet stayed that way for ages. The new marine carpet weighs less and dries much quicker. I have never looked back
Hope this helps
Ardy

_________________
Ardy
Adelaide South Australia
Red H180 3.0 Merc

Just my opinion, I would go with a third party manufacturer to replace your carpet. Usually they'll send you some material to cut a template and then they make it to that spec. There are some really nice materials out there that will hold up better than what FW uses. I was at the boat show last weekend and even saw some really nice thatch and berber snap in carpets. My 2 year old carpet in my H260 looks worn already. I plan on replacing it with something entirely different.

_________________
Current Boats:
2012 FW H260, 8.2 B3X (DTS) "Ctrl-Alt-Delete"
Previous Boats:
1984 Century 5000, Merc 260 Alpha 1
2012 Yamaha VXR

Kansas City, MO

Thanks for the responses guys. That's what i was figuring I'd end up having to do.

thanks!

_________________
2006 Nissan Titan SE 6" Lift
2000 Four Winns 190 Horizon 5.0GL

This year will be the third season with carpet from Home Depot. I bought it, used the old carpet as a template, put the snaps in myself (bought them from Walmart). Still as good as the day I put it in, no rubber backing to flake, the edges didn't fray and only into it about $45.00 total.

_________________
1999 180 Horizon LS 4.3 L GL Volvo SX
1994 Powerstroke
2002 Jeep Wrangler
not@work.gon
Happiness is an Empty Boat Trailer!!!

Well if you do want the original style (or some other choices), you can try:
http://www.snapincarpets.com
They may already have templates for your boat, or you may need to make them. The good thing is they do a full edging on the carpet like the original.

_________________

"Knot Easy" 2000 Horizon 240 Volvo 5.7GS /SX
tow: 2017 Honda PILOT EXL-AWD
prev. boats:
'87 Chaparral 198CXL 4.3 OMC Cobra
'69 Jetstar 16ft Ski Boat, 115hp Yamaha
'68 Aluminum Jon Boat, 3hp Sears
'64 Water Wings