| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 2008 H210 trim switch broken https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=13899 |
Page 1 of 1 |
| Author: | KNEEOIL [ Fri Apr 10, 2015 11:40 am ] |
| Post subject: | 2008 H210 trim switch broken |
It has started working intermittently and will get stuck in the up or down position and there's a lot of play in the switch. When out on the water yesterday, discovered that it had gotten stuck in the down position thus the hydraulics were actuating on-stop. Can the switch be swapped out or do I need to replace the entire throttle yoke? Part numbers would be appreciated. Thanks! |
|
| Author: | fi.na.tine [ Fri Apr 10, 2015 3:15 pm ] |
| Post subject: | Re: 2008 H210 trim switch broken |
You did not mention if it's a VP or Merc. The trim switch is available on ebay... BUT - The entire throttle unit is also on there. I plan on switching out my throttle eventually when I start doing everything in stainless - cup holders, Vents, fuel fill... Do a web search for your year and model. There is a PDF parts catalog for the VP out there. |
|
| Author: | LouC [ Fri Apr 10, 2015 4:16 pm ] |
| Post subject: | Re: 2008 H210 trim switch broken |
Most of the VP boats I have seen recently use the Teleflex CH-1700 or similar model. You can replace the trim switches on these units but may have to splice in the new wiring. Merc, I don't know who makes theirs for them. |
|
| Author: | KNEEOIL [ Fri Apr 10, 2015 4:28 pm ] |
| Post subject: | Re: 2008 H210 trim switch broken |
It's a VP. Ordered a new switch for $12 + shipping. Will post pics and a writeup for the swap. |
|
| Author: | fi.na.tine [ Sat Apr 11, 2015 1:58 am ] |
| Post subject: | Re: 2008 H210 trim switch broken |
I went searching for my engine and drive online and found the owners manual and most of the repair manuals available for free online. Next to find is the do-it-yourself manual. |
|
| Author: | Graham R [ Sun Apr 12, 2015 4:04 pm ] |
| Post subject: | Re: 2008 H210 trim switch broken |
If you dig enough on the internet, you can usually find the original supplier to VP or Merc. I found the kill switch/ cord supplier for the part for VP diesels; half the price of the VP "kit". |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|