www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Camper Enclosure
https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=13949		 Page 1 of 1
Author:  purdueosch [ Mon Apr 27, 2015 2:47 pm ]
Post subject:  Camper Enclosure
Hey all,
I'm looking for some information (and maybe some pictures) regarding the camper enclosure for my 2012 H260. I have the stainless wake board tower from the factory and the factory Bimini top integrated into the tower. My Bimini top has zippers that seem to be for a camper enclosure but I can't find much information about it. Is it possible the standard camper enclosure for boats without the tower will also work for my boat?

Thanks
Author:  Flying Sushi [ Wed Apr 29, 2015 6:35 am ]
Post subject:  Re: Camper Enclosure
Four Winns might made provision to build a Camper Enclosure for forward lean arch tower with integrated bimni however, never made it by them… When we got our H260 we did not have arch but had a camper enclosure (with bimni extension) When we install a OEM SS forward lean arch we were hoping we can figure out to retro fit this camper enclosure to work with it. It turned out the OEM camper enclosure is little wider than OEM arch at top and will not fit under the arch or attach to new bimni… Therefore we ended up with plan to making our own camper enclosure with the new arch with bimni by the local marine upholstery shop… Unfortunately we never had a chance to bring our boat to shop to finish this project….

Image

Image
Author:  rpengr [ Wed Apr 29, 2015 7:08 am ]
Post subject:  Re: Camper Enclosure
Flying Sushi wrote:
Image


Flying Sushi: What do you have supporting your bow cover? Is that have room for a person or kids to take a nap under?
Author:  purdueosch [ Wed Apr 29, 2015 10:48 am ]
Post subject:  Re: Camper Enclosure
rpengr wrote:
Flying Sushi wrote:
Image


Flying Sushi: What do you have supporting your bow cover? Is that have room for a person or kids to take a nap under?


rpengr: I have the same bow cover. There is a large T shaped pole that has a height adjustment. It's very sturdy and you could easily put a few small kids in there or one adult. The cover also snaps to the bottom of the windshield creating a barrier from rain.

Flying Sushi: Thanks for the info. I guess I'll have to get some prices on having it made. By the way, the full cover you sold me is working out great! I REALLY like the ratchets in the back, it makes taking it on and off a breeze.
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/