| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Cockpit drain kind of sucks... https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=14972 |
Page 1 of 1 |
| Author: | schoolsOut [ Tue Jun 28, 2016 7:22 pm ] |
| Post subject: | Cockpit drain kind of sucks... |
Anyone have any good solutions to the terrible cockpit drain in my 2005 210 Horizon? The drain is located too high and requires the water in the cockpit to be pretty deep before it actually drains into the bilge. Thanks in advance. |
|
| Author: | Twox48 [ Thu Jun 30, 2016 3:22 pm ] |
| Post subject: | Re: Cockpit drain kind of sucks... |
I have to agree... My new to me '09 H260 has the drain mounted vertically on the rear seat base. Probably the same as yours?? It has a flange so the holes are about 1" off the floor! Really Four Winns? Was it that hard to mold it into the floor? |
|
| Author: | Jdpber [ Thu Jun 30, 2016 3:43 pm ] |
| Post subject: | Re: Cockpit drain kind of sucks... |
it should be a flush floor scupper and not a vertically mounted. i would recommend installing one of these and plumbing it to the same out feed as the vertical. http://www.carolinaboatoutfitters.com/catalog/floor-drain-top-mount-flat-cover-112-hose-ss-gem-89510-p-84217.html |
|
| Author: | schoolsOut [ Mon Jul 04, 2016 11:32 am ] |
| Post subject: | Re: Cockpit drain kind of sucks... |
Jdpber wrote: it should be a flush floor scupper and not a vertically mounted. i would recommend installing one of these and plumbing it to the same out feed as the vertical. http://www.carolinaboatoutfitters.com/catalog/floor-drain-top-mount-flat-cover-112-hose-ss-gem-89510-p-84217.html I was considering that. I really would rather not drill a huge hole in the floor, but that might be what it takes. Thanks for the reply. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|