| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Bimini Size and/or Part #? https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=15058 |
Page 1 of 1 |
| Author: | wudevr [ Mon Jul 25, 2016 11:58 am ] |
| Post subject: | Bimini Size and/or Part #? |
Hi Everyone. I'm new to the forum and this is my 1st post. I have a red 2007 Horizon 200. Unfortunately, mice have gotten to my bimini top and boot. I want to purchase a Bimini Top Replacement Canvas and Boot, but am unable to find the part number. I'd appreciate it if anyone could give me the part number. Suggestions on where to buy would be great also. Thanks! |
|
| Author: | 230 Mike [ Mon Jul 25, 2016 1:04 pm ] |
| Post subject: | Re: Bimini Size and/or Part #? |
Great Lakes Boat Tops made the original. Welcome to the forum. |
|
| Author: | Clambake [ Mon Jul 25, 2016 2:34 pm ] |
| Post subject: | Re: Bimini Size and/or Part #? |
230 Mike wrote: Great Lakes Boat Tops made the original. Welcome to the forum. Only up to 2006 for the H200. It may be similar to the 2007 model though. |
|
| Author: | 230 Mike [ Mon Jul 25, 2016 3:26 pm ] |
| Post subject: | Re: Bimini Size and/or Part #? |
Who did they switch to? |
|
| Author: | wudevr [ Tue Jul 26, 2016 2:32 pm ] |
| Post subject: | Re: Bimini Size and/or Part #? |
Thanks for the replies. Great Lakes quoted me $500 without the boot. I found one from Empire Covers for $80. Does anyone have any experience with Empire covers? |
|
| Author: | LouC [ Tue Jul 26, 2016 2:45 pm ] |
| Post subject: | Re: Bimini Size and/or Part #? |
The other thing you could do, is if the original is good enough to use as a pattern, take it to a marine canvas shop and have them make you a new one. That way you're sure it will fit and look right. |
|
| Author: | joet [ Wed Jul 27, 2016 4:03 am ] |
| Post subject: | Re: Bimini Size and/or Part #? |
wudevr wrote: Thanks for the replies. Great Lakes quoted me $500 without the boot. I found one from Empire Covers for $80. Does anyone have any experience with Empire covers? No experience with them but the few google reviews they have do not look promising. Also the replacement cover they sell is made to fit their frame so probably will not be a good fit for your OEM frame. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|