www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
VDO gauge cluster https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=15071 |
Page 1 of 1 |
Author: | AlexJ [ Sat Jul 30, 2016 11:16 am ] |
Post subject: | VDO gauge cluster |
Does anyone know how to remove the VDO gauge cluster from the dash? 1995 Horizon 190 |
Author: | FASTBULLITT [ Sat Jul 30, 2016 6:14 pm ] |
Post subject: | Re: VDO gauge cluster |
Philips head screw on the top of the cluster where it meets the dash its kinda hidden |
Author: | Surface Interval [ Sat Jul 30, 2016 6:22 pm ] |
Post subject: | Re: VDO gauge cluster |
While sitting in the drivers seat, feel for a finger hold in the housing at the top center of the clear plexiglass instrument lense. There is 1 Phillips screw in this recess going vertically up into the glareshield. Remove the screw, tip the steering wheel down, use this recess to pull the instrument cluster toward you. I don't recall if the harness needed to be unplugged from under the dash or if it can be unplugged when you pull the gauge cluster out. |
Author: | AlexJ [ Sat Jul 30, 2016 6:59 pm ] |
Post subject: | Re: VDO gauge cluster |
Thanks, I will give it a try. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |