www.iFourWinns.com

Hi, Whilst out today I managed to hit a wave wrong and the force has pushed the screen out of the bottom seal and now the opening window don't line up either. Has anyone managed to do this an how do I go about resetting the window back in the lower rubber seal. The curved screen has not cracked or broken. Is it much of a job or should I leave it to the professionals.
Thanks Ray

_________________
[url][/url]

I haven't dealt with that, but I'd caution against towing it in that condition to minimize the chances of cracking a piece of curved glass that isn't supported properly.

_________________


Mike
2005 Four Winns 230/240
VP 5.7GXi/DP
1998 F-150 XLT
Boat Pic

What year is your boat?

How about posting a pic so we can see what the frame looks like, on the older boats its possible to remove a few screws and loosen part of the frame to adjust the position of the glass...

_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8

1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II

Thanks for the help. I did tow it 14 miles very gently, had a good look at it then called my regular marina Olsen. got it in and back the same day Can't complain at $108. I could have easily cracked it as the complete frame had to be removed then reseal the rubber and reassemble the frame and install. 2008 curved screen with walk through window attatched. I was lucky.

Thanks everyone Ray

_________________
[url][/url]