www.iFourWinns.com

I have an 05 220 Horizon. I have been trying to find where I can get these lids that hold speakers facing the rear of boat so I can add to my boat. Any info would be greatly appreciated. I included pic to show what I am looking for. Looks like these are lids that are for the rear storage area.

Welcome. And nice looking boat.

As for the rear storage lid speakers, I'm pretty sure they didn't make those for our era Horizons. And I'm pretty sure I saw somewhere that you couldn't fit a newer model lid with speakers on the older models like ours. You're best bet is probably looking to do something custom. What I've seen done before is adding two speakers on the rear deck between the swim platform and the engine hatch on each side of the ski tow. This is probably the direction I would go for this type of upgrade. That being said, I have not done it and don't plan to. Good luck!

_________________
2005 FW Horizon 250
8.1L VP DP

I bet a fiberglass shop can do something with the existing ones, might be a 4/500 bucks, but what is that between a man and his boat

_________________
Current:
2000 Sea Ray 380 Sundancer "still Livin the Dream"

Past
2002 268 Vista 5.7 GXI "Livin' the Dream"
1996 Rinker 192 Captiva. "The Simple Life"
1999 Yamaha XLL 1200 Waverunner.
1976 Mercury Marquis tri hull 120 hp

as chris said that is not a hard modification for a skilled Glass worker.

_________________
Not Penny's Boat

1993 190 Horizon 5.0L EFI
http://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=11136
1977 14' CMF Skiff SOLD
2015 Emotion Stealth Angler 11

I ordered mine directly from Four Winns through a dealer. They were an option that was offered after the purchase of my boat. I'm not sure it was ever an option on the 220 though. You should be able to reuse the hardware on the hatches you have already. I didn't order them with the hardware on purpose so I could align the doors with the hardware I already had in place. In fact make sure they don't pre drill the holes for the hinges so as to align easier for installation. They were about $300 a piece. I ordered a wiring harness as well but I cant honestly remember if I needed it. I did use it but I had to modify it a bit as I recall so I can't remember if it was absolutely necessary or not.

So if it was an option on the 2009 or later 220 it should in theory be available from Four Winns.

_________________
2008 Horizon 260 VP 8.1 Gi

Here are a couple of links to other posts on this topic--including my solution I came up with.

http://www.smwebhead.com/phpBB3/viewtopic.php?f=19&t=7010

http://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=7535

_________________
Norris Lake, Stardust Marina, Andersonville, TN
2005 Four Winns 230 Horizon 5.7L Volvo Gi/DP
2001 Maxum 1900SR 5.0L V8 (Sold)
2011 Nissan Armada Platnum