| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| H230 Bimini removal https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=15496 |
Page 1 of 1 |
| Author: | shewitt33 [ Tue May 30, 2017 12:30 pm ] |
| Post subject: | H230 Bimini removal |
Greetings. Newbie here. My 2014 Bimini I am trying to remove the bimini. The connection to the boat from the Bimini has a latch type I am unfamiliar with. The Bimini main rod that generally stays connected always unless removal, has a ball that slips into a reciever that has a spring loaded rod that has a rounded cut-away. How does this operate for removal. Thanks, Scott |
|
| Author: | skidaddytn [ Thu Jun 01, 2017 12:54 pm ] |
| Post subject: | Re: H230 Bimini removal |
post a picture maybe?? hard to tell what you've got. My FW bimini has some ball joints that are held in by clevis pins (the spring loaded type). you have to remove the pin first then slide the ball out of the receiver |
|
| Author: | ThaScoobs [ Fri Jun 02, 2017 10:49 am ] |
| Post subject: | Re: H230 Bimini removal |
Usually there is a little latch button that is spring loaded that should move to release the ball out of the socket. That is how mine is. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|