| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Turn key on, gauges don't move. https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=15921 |
Page 1 of 1 |
| Author: | 3sheetstothewinn [ Wed May 09, 2018 4:35 pm ] |
| Post subject: | Turn key on, gauges don't move. |
I have a 92 horizon 190. When i turn the key to the on position none of the gauges move. The boat won't turn over with the key. The radio,blower,bilge, nav and interior lights all work. The starter will crank if I jump it at the starter solenoid with a screw driver. Help please I'm at my wits end. thanks |
|
| Author: | LouC [ Wed May 09, 2018 5:48 pm ] |
| Post subject: | Re: Turn key on, gauges don't move. |
Look for oxidation on the ignition fuse in the fuse panel under the dashboard. Happened to me a few years ago. Fuse had continuity but the oxidation kept the current from flowing. |
|
| Author: | 3sheetstothewinn [ Thu May 10, 2018 7:15 am ] |
| Post subject: | Re: Turn key on, gauges don't move. |
That's one of the things that has me confused. There is no fuse marked for ignition in the fuse panel. Everything else is there blower, bilge, radio, lights, horn, but no fuse for ignition? Any idea where else it might be? |
|
| Author: | LouC [ Thu May 10, 2018 12:42 pm ] |
| Post subject: | Re: Turn key on, gauges don't move. |
That is odd. What engine, OMC or Merc? |
|
| Author: | 3sheetstothewinn [ Thu May 10, 2018 10:22 pm ] |
| Post subject: | Re: Turn key on, gauges don't move. |
5.0 OMC |
|
| Author: | LouC [ Fri May 11, 2018 8:51 am ] |
| Post subject: | Re: Turn key on, gauges don't move. |
I wonder if they relocated it to the engine wiring harness? |
|
| Author: | I_am_Sam [ Thu May 31, 2018 12:13 am ] |
| Post subject: | Re: Turn key on, gauges don't move. |
Check your kill switch. It'll kill your dash and ignition but leave everything else with power. And then maybe the micro-switch for the throttle lever (could be saying that the lever is in gear). but my money is on the kill switch. |
|
| Author: | Graham R [ Fri Jun 01, 2018 8:08 am ] |
| Post subject: | Re: Turn key on, gauges don't move. |
Isn't there an ignition circuit breaker on the ignition switch panel? A black circular thing with a white button. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|