www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

GPS Location
https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=1606
Page 1 of 1

Author:  Shanhuber [ Sat Mar 08, 2008 12:56 am ]
Post subject:  GPS Location

Anyone have any good ideas of where to mount a GPS/Fish finder combo unit in a 2008 H200?
Shan

Author:  jjker [ Tue Mar 11, 2008 9:59 am ]
Post subject:  Re: GPS Location

I'm looking for a solution to this problem, too. I found one guy who had installed it in the dash where the cubby hole is, and I think this would be ideal, but am having a hard time finding a unit that is suitable that is the correct size that is also flush-mountable. Please let me know what you find out in your search, because this is important to me to get it right.

So far, I'm looking at a Garmin GPSMAP 3005C. It's bigger than the hole, but I don't think it's bigger than it can be. I'll need to do a little cutting, though, which bothers me a little.

My other plan if I can't find the perfect plotter, is to simply get a handheld and suction cup mount for the windshield.

Author:  cougarcruiser [ Tue Mar 11, 2008 10:14 am ]
Post subject:  Re: GPS Location

Your best bet for easy visibility on that boat is in the corner of the windshield.

I would suggest a slick RAM style mount to work with.
http://www.ram-mount.com/

Suction cups on the windshield are not the greatest solution unless you are always going to pull the equipment and lock it up.

Author:  Shanhuber [ Wed Mar 12, 2008 7:53 pm ]
Post subject:  Re: GPS Location

The ram mounts appear to be what I am looking for. Look at the mount listed under marine electronics. I am thinking of mounting it off the right side just above the side cushion (May have to trim the cushion - not sure, as I don't get the boat till april or may). The GPS unit can then angle upwards just above the right side of the dash. I do not want to mount it into the cubby, I think having to look down and around the steering wheel to see the GPS would be a pain. I will let you know more when I get the boat. Can't Wait!!!

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/