www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Lock on new trailer
https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=1937		 Page 1 of 1
Author:  KSJ8 [ Fri May 23, 2008 11:07 am ]
Post subject:  Lock on new trailer
Now that we have the boat I can't use my old coupler lock when the trailer is hooked up to Jeep. Anyone have a lock they use?
Author:  gomes [ Fri May 23, 2008 11:19 am ]
Post subject:  Re: Lock on new trailer
I have the lock that my Dealer says they just discovered. It is a pin that goes through the tongue and uses a key. It works when the trailer is unhooked and when it is on you vehicle. i can get you more details when i go home if you would like. What kind of jeep do you tow with?
Author:  Blessed [ Fri May 23, 2008 11:40 am ]
Post subject:  Re: Lock on new trailer
I bought one for my trailer tongue. It was too short but would have otherwise been fine I think. It was Stainless (why I got it) but there is a chromed version that is longer and I suspect will work out. Concievably the lock would work on or off the hitch since you remove the ability to open the coupler. Of course they do not seem like bulletproof security but at least they may be enough deterrnet that a thief would move on to something thats less of a hassel. God knows thievs are not the most ambitious group right? :roll:

Master Lock makes them and they are very affordable - like $8 - $10 bucks at HomeDepot or WallyWorld.

Don't get this one: :(

Image

This one is worth a try: :D

Image
Author:  Rob [ Fri May 23, 2008 12:34 pm ]
Post subject:  Re: Lock on new trailer
I got the second one. Haven't tried it as of yet though...

Had the first and +1 - isn't long enough.
Author:  230 Mike [ Fri May 23, 2008 2:00 pm ]
Post subject:  Re: Lock on new trailer
Trimax UMAX100 for the coupler.
Trimax stainless locking receiver pin and coupler lock pins, all keyed the same as the UMAX100.
Author:  KSJ8 [ Fri May 23, 2008 3:49 pm ]
Post subject:  Re: Lock on new trailer
Great Thanks for the response. The dealer didn't have know Idea what to use.
Author:  KSJ8 [ Sun May 25, 2008 6:57 pm ]
Post subject:  Re: Lock on new trailer
Picked up the 2nd one pictured @ Wally World on way home from lake $6:82 works fine!!
Author:  Shanhuber [ Mon May 26, 2008 9:17 am ]
Post subject:  Re: Lock on new trailer
go to e-trailer and buy the Trailer Coupler Lock - Deadbolt Style for Surge Brake with 3-3/8" Span. This is an exact fit for the low profile actuator on four winns trailers. It seems long, but with the lip on the tongue, you need the full 3-3/8 span to fit thru the hole (it will replace the safety pin)
http://www.etrailer.com/pc-L~28012.htm
Author:  KSJ8 [ Sat May 31, 2008 1:15 pm ]
Post subject:  Re: Lock on new trailer
Blessed wrote:
I bought one for my trailer tongue. It was too short but would have otherwise been fine I think. It was Stainless (why I got it) but there is a chromed version that is longer and I suspect will work out. Concievably the lock would work on or off the hitch since you remove the ability to open the coupler. Of course they do not seem like bulletproof security but at least they may be enough deterrnet that a thief would move on to something thats less of a hassel. God knows thievs are not the most ambitious group right? :roll:

Master Lock makes them and they are very affordable - like $8 - $10 bucks at HomeDepot or WallyWorld.

Don't get this one: :(

Image

This one is worth a try: :D

Image


Took the pin that came W/trailer off the spring steel ring, drilled hole in the plastic cap of the lock installed the ring through it. Now I won't loose the pin.
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/