www.iFourWinns.com • View topic - Cobra Prop Nut Torque

View unanswered posts | View active topics

Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]

Cobra Prop Nut Torque

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

sundowner205

Post subject: Cobra Prop Nut Torque

Posted: Thu Jun 12, 2008 11:36 am

Minnow

Joined: Thu Jun 12, 2008 11:24 am
Posts: 14
Location: North Shore, Long Island, NY

Hi Everyone,

I tried searching for the answer to this on the forum/web but could not find a definite answer.
I have an '89 Sundowner 205 with a Cobra 800 outdrive. I recently bought a SS prop, and before I replace my existing prop I need the proper torque specs for the prop nut. I had some Merc guys tell me they torque their's to 55, however I want to be sure for my Cobra. Thanx in advance!

Top

BrentC5Z

Post subject: Re: Cobra Prop Nut Torque

Posted: Thu Jun 12, 2008 1:09 pm

GIDDY UP

Joined: Fri Mar 14, 2008 3:08 pm
Posts: 856
Location: Tulsa, OK

Hi & welcome to the site.

You may want to post this in the sundowner section.

_________________

H210SS 6.2
F150 Platinum

Top

sundowner205

Post subject: Re: Cobra Prop Nut Torque

Posted: Thu Jun 12, 2008 1:28 pm

Minnow

Joined: Thu Jun 12, 2008 11:24 am
Posts: 14
Location: North Shore, Long Island, NY

My bad didn't even notice it was posted in the Horizon forum.

Top

LouC

Post subject: Re: Cobra Prop Nut Torque

Posted: Fri Jun 13, 2008 6:05 am

email admin your custom rank

Joined: Thu Jun 29, 2006 10:26 pm
Posts: 5667
Location: Long Island NY

70-80 ft lbs if you have the bronze spacer, 120 in lbs if you have the black nylon one. I just get it good and tight with the prop wrench. Grease the shaft with OMC triple guard grease and use a new stainless cotter pin.

_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8

1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II

Top

Page 1 of 1

[ 4 posts ]

Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 26 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum