| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| connector piece to Bimini https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=232 |
Page 1 of 1 |
| Author: | DaleG [ Tue Jul 11, 2006 1:24 pm ] |
| Post subject: | connector piece to Bimini |
How does the clear connector piece (as Four Winns call it) connect between the Bimini and the top of the windshield -- specifically how does it attach to the top of the windshield?? thx |
|
| Author: | Cincy Aquaholic [ Tue Jul 11, 2006 3:05 pm ] |
| Post subject: | |
Mine attaches to the bimini with zippers then it snaps to the windshield. I have snaps all the way around the top edge of the windshield frame to secure the front and side plastic pieces. Only problem with that is they are hard on my cockpit cover. They have already worn some holes. |
|
| Author: | DaleG [ Wed Jul 12, 2006 7:28 am ] |
| Post subject: | |
Cincy --- the outer header piece on my windshield does not have any snaps -- only a long slot roughly a quarter inch wide -- do the snaps fit in there through some attachment ???? thx |
|
| Author: | Cincy Aquaholic [ Wed Jul 12, 2006 4:05 pm ] |
| Post subject: | |
I believe the snaps do go into that grove. When I get my boat back on Friday I'll try and remember to take a pic. I recall that the snaps look a little different then the other ones but still seemed to screw into that slot. |
|
| Author: | wkearney99 [ Wed Jul 12, 2006 11:25 pm ] |
| Post subject: | |
Cincy Aquaholic wrote: Only problem with that is they are hard on my cockpit cover. They have already worn some holes. Oh great, one more thing to worry about wearing through... Hmmm, maybe I'll make some sort of strip out of something flexible that provides some cushioning over those snaps.
|
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|