www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Wed Sep 23, 2020 5:56 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Tue May 26, 2020 12:16 am 
Offline
Tadpole

Joined: Thu Jun 20, 2019 1:45 pm
Posts: 4
This might be an easy one. I have a Kicker sub installed by the feet on the port side captains chair. Just above that and behind the kick panel is a Kicker ZX650.4 amp. I need to do some troubleshooting of amp/wiring. I can reach a few things through the port side bow cushion hole (rope/bumper storage) but can't work that way very long or well.
The head unit is in the top cubby just above the cooler. Guessing there has to be a way to remove the dash/cubbies to get access to the back of the sub and amp? Do I take out the screws that hole the top cubby in and if so, assuming there has to be a connector to the head unit I have to disconnect to move it out of the way?

I am pretty knowledgeable of the electronics and such but nervous to disassemble the dash and end up with something that looks a mess and doesn't go back together looking good.
Thanks for any suggestions you can throw my way.


Top
 Profile  
 
PostPosted: Mon Jul 13, 2020 12:14 am 
Offline
Tadpole

Joined: Tue Jun 30, 2020 10:18 am
Posts: 3
I've got an 04 horizon 200 and can't figure out how to get the drivers dash apart either. Three gauges all stopped working but I can't get to the wiring. I was told the whole plastic surround comes off but not how.
THANKS


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group