www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Draining the drive unit. https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=23594 |
Page 1 of 1 |
Author: | gtoden1 [ Mon Aug 24, 2020 5:14 pm ] |
Post subject: | Draining the drive unit. |
Hello everyone, I'm new to this forum. I have a 2001 Horizon 190 with a 5.0GL Volvo engine. I've had this boat for about four years. I have been working on it and have changed the fuel filter and changed the oil and filter. Next I want to change the oil in the drive unit, per manual I have loosen the oil dip stick and the oil level plug but can't get the oil drain plug loose, its a straight blade screw but won't loosen. Does anyone have an idea how to get this out? Thanks for any help. |
Author: | jontmiller [ Mon Aug 24, 2020 10:08 pm ] |
Post subject: | Re: Draining the drive unit. |
This is what I use...just make sure it’s going the correct direction. https://www.amazon.com/Hi-Spec-Shock-Re ... NrPXRydWU= |
Author: | Flyer51 [ Tue Aug 25, 2020 4:33 am ] |
Post subject: | Re: Draining the drive unit. |
I have the same tool but have also used a heavy screwdriver and tapped the edge of the screw with a hammer on end of the screwdriver. That is how I saw it done by the mechanic at my dealer. Just be careful to not damage the screw. Comes loose rather easy with the proper strike. |
Author: | captkevin [ Wed Aug 26, 2020 10:33 am ] |
Post subject: | Re: Draining the drive unit. |
I use the biggest flat screw driver i own. You might want to order up some replacement plugs to have on hand just in case. |
Author: | skidaddytn [ Tue Sep 01, 2020 1:16 pm ] |
Post subject: | Re: Draining the drive unit. |
Go to HD or Lowes and get a giant flathead screwdriver. This flathead should be MUCH bigger than the largest screwdriver that comes in a standard 8-10 normal screwdriver set. It can double as a murder weapon. I have a Husky brand one. It has served me well. |
Author: | I_am_Sam [ Thu Feb 18, 2021 10:47 pm ] |
Post subject: | Re: Draining the drive unit. |
https://shop.snapon.com/product/Marine- ... river-(Red)/SGD155CR best investment you'll ever make working on drive units. |
Author: | Surface Interval [ Fri Feb 19, 2021 8:01 pm ] |
Post subject: | Re: Draining the drive unit. |
I also use a tool like jontmiller identified. Another tip for straight or phillips screwdrivers to reduce or prevent slipping is to use a small amount of valve grinding compound on the screwdriver tip. The gritty texture works well. Be sure to not get the compound into places you don't want it. |
Author: | 220horizon [ Tue May 04, 2021 1:58 pm ] |
Post subject: | Re: Draining the drive unit. |
I know this topic is old but I thought I'd add some useful advice. You can clamp a set of vicegrips on the handle of the screwdriver for more torque and grip. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |