www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Power trim
https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=23864
Page 1 of 1

Author:  MTONeill73 [ Mon Jun 10, 2024 9:48 am ]
Post subject:  Power trim

I'm having issues with my power trim, it was stuck in the up position, I was able to jump the switch out to get it lowed but now I can't get it to do anything. I've checked all the fuses and they are good, the relays are clicking when I jump the switch out but the pump doesn't run and the only way I can get power at the switch is to run wire directly to the fuse at the pump. Any ideas??

Author:  LouC [ Mon Jun 10, 2024 11:24 am ]
Post subject:  Re: Power trim

If you have both power to the up & down relays and good grounds it could be the trim switch on the remote control or a wire could have broken inside the remote control. The relays get power & ground from the engine harness but the remote control turns each relay on.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/