| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| horizon 190 thru-hull exhaust https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=2439 |
Page 1 of 1 |
| Author: | skidooman [ Fri Sep 12, 2008 10:49 am ] |
| Post subject: | horizon 190 thru-hull exhaust |
I have an 01 Horizon 190 with a 5.0 in it. I did a search but didnt find any older horizons with it done, I am looking to put thru-hull exhaust on it. I like how it sounds out of the water and would like to hear it all the time. Has anyone done this? |
|
| Author: | Architectdave [ Tue Sep 16, 2008 3:40 pm ] |
| Post subject: | Re: horizon 190 thru-hull exhaust |
Captain's Call system, loud or quiet. |
|
| Author: | impulse [ Tue Oct 14, 2008 3:54 pm ] |
| Post subject: | Re: horizon 190 thru-hull exhaust |
Start here - http://www.corsaperf.com/marine.htm Talk to your dealer. See if it's even possible with your boat before you waste a bunch of time. Even if you do the work yourself it's not going to be cheap. |
|
| Author: | millhaven_nice_guy [ Tue Oct 14, 2008 7:12 pm ] |
| Post subject: | Re: horizon 190 thru-hull exhaust |
I have a similar project in mind for my 2001 H260 with the big block 454! I was lucky enough to find side exit exhaust tips on ebay last year. Are you looking for a factory setup or are you willing to fabricate (or have fabricated) your own system? This project has low priority since the wife is not overly impressed but when I get it done, I will post it. |
|
| Author: | skidooman [ Wed Oct 15, 2008 12:49 pm ] |
| Post subject: | Re: horizon 190 thru-hull exhaust |
please do. I am not afraid of a little fab work. I can weld and cut, i just dont have a pipe bender. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|