| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| VDO Dash and Dual Batteries https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=2755 |
Page 1 of 1 |
| Author: | cnst [ Sat Jan 24, 2009 2:34 pm ] |
| Post subject: | VDO Dash and Dual Batteries |
Hello All, If the common fix for the VDO cluster is a proper ground straight to the battery, would it matter which battery was selected if you have a dual setup? For example, if it's grounded to battery #1 and battery #2 is the active battery, does it matter? Andy |
|
| Author: | Graham R [ Sun Jan 25, 2009 4:36 am ] |
| Post subject: | Re: VDO Dash and Dual Batteries |
Andy, Both battery negative terminals are usually connected to a common ground post (on the engine), so it doesn't matter to which battery the dash ground wire is attached; the battery selector switch is connected to and switches the +ve terminals. I would be tempted to connect the ground cable to the engine ground post, rather than to any one individual battery -ve terminal. Graham |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|