www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

1988 200 horizon engine swap
https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=281
Page 1 of 1

Author:  serious juju [ Mon Jul 24, 2006 3:38 pm ]
Post subject:  1988 200 horizon engine swap

Ok I have been lerking on this site for some time and hope you guys can help

I have the chance to swap my 4.3 engine in my 88 horizion with a 5.7
has anyone ever done this
I know I need new manifolds. what I am wondering is if the engine mounts are the same
ans anyone help or point me in the right direction.

Thanks

Rob

Author:  LouC [ Thu Jul 27, 2006 2:14 pm ]
Post subject: 

Why don't you e-mail 4 winns they are pretty helpful with questions. The front engine mounts on the V-8 are several inches foward of those on the V-6. The other issue is the gear ratios in the outdrive, they are different for the V-6 and V-8. Your V-6 drive will not have the correct ratio for the V-8. The manifolds are different, although the Y pipe may be the same. Do you have an OMC drive system or Merc?

Author:  serious juju [ Tue Aug 01, 2006 3:41 pm ]
Post subject: 

I have the OMC drive and I am aware of the manifolds
I was wondering about the engine mounts

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/