www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Engine Compartment cover
https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=298
Page 1 of 1

Author:  scotts [ Fri Jul 28, 2006 2:32 pm ]
Post subject:  Engine Compartment cover

New to boating. Just pickup a 1985 Horizon 195 Cuddy and i have some parts i need but am having trouble finding them. The main one i need is the engine compartment since the one on my boat is deteriorated. Is there a site that sells them or Should i look for someone to build it or is it something i can build myself? Any help would be great

Author:  230 Mike [ Fri Jul 28, 2006 6:06 pm ]
Post subject: 

Might have to build that yourself out of marine plywood and cover with carpet.

Author:  scotts [ Sat Jul 29, 2006 9:10 am ]
Post subject:  appreciate the reply

Do i need to use resin and cloth to make it waterproof and then carpet? What size plywood should i use? Also the old one is so decrepid that i couldnt even use it as a guide is there somewhere i can get the dimensions?

Author:  230 Mike [ Sat Jul 29, 2006 6:20 pm ]
Post subject: 

I've never made one so I can't offer a lot of advice. There isn't enough left of the original to even take measurements from it? About all I can offer is that you don't want to use plain old plywood; you'll want to use marine grade plywood, stainless steel hinges & fasteners, etc.

I'd call Four Winns before doing anything else and see what they can offer.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/