www.iFourWinns.com • View topic

View unanswered posts | View active topics

Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]

Bilge Pump

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

hamuel2003

Post subject: Bilge Pump

Posted: Mon May 11, 2009 1:01 pm

Seahorse

Joined: Sat May 02, 2009 9:28 pm
Posts: 24

Should the Bilge Pump be pumping out all of the water in my bilge, because mine seems to start sucking air before all of the water is out, it looks like it is up about a 1/4 inch on the float switch. I don't know if I have ever really noticed this before in years past, and I just replaced the switch last year, and am wondering if the pump might be starting to go now.

_________________
2001 190 Horizon
Volvo Penta SX - 5.0GL

Top

Jim_R

Post subject: Re: Bilge Pump

Posted: Mon May 11, 2009 5:39 pm

Narwhal

Joined: Mon Feb 26, 2007 10:29 am
Posts: 1035
Location: Chicago, IL

Maybe the new switch stops the pump at a higher 'low water level' than the old switch. Odds are your pump is fine.

_________________
2007 Horizon 200
4.3L GXi/ SX 225 HP

Top

Page 1 of 1

[ 2 posts ]

Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 30 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum